Kauffmann T-model features

Kauffmann regards the T-model as the mother beast. The one that got the whole thing started. A magic design that is still as relevant as when it first came out. So we pay tribute to that heritage. And we build upon it.
Our T-models all have that well played worn in feeling. It’s like putting on a pair of old faded jeans. Nowhere on a guitar is that feeling more distinct than on its neck. So we carefully roll the edges of the fingerboard, we take the finish of the back of the neck and we make sure the fretwork is right on the mark.

All our T-models come with a 9,5″ radius and 6105 fretwire. So you still have the vintage vibe feel to the neck but with the playability of a much flatter fingerboard. Our 50’s models have a maple fingerboard and our 60′ models have a rosewood fingerboard.

Our finishes and aging process give the guitar it’s distinct look. We use either period correct vintage colors or Dupont car color’s of the 60’s. And every once in a while we come with something new. Like our Monroe Red for example. We determine the level of aging while building the guitar. And we make sure that the aging is realistic and balanced. So we match the aging of the hardware with the aging of the body. Details matter.

On board you will find our Kauffmann pickups when it is single coil. They are best described as a creamy bluesy sound without losing that vintage transparency. We use CTS pots, vintage wire and we put in a treble bleed. On the HS models we combine a Kauffmann bridge pickup with a Amber humbucker. And we add a coil split.

Read more
View All Kauffmann Guitars

Meet The T-model

Details

Aging levels

We do three aging levels. Lightly aged with just a bit of crackle. Moderate aging, crackle and some play wear. Severe aging, crackle and extreme play wear.

Worn in smooth neck

We take the finish of on all of our necks to give you that well worn in smooth feeling.

Aged finish

The thin finish is treated to give it that authentic crackled appearance.. Especially on lighter colored guitars this a marvelous feature.

Ultra thin finish

Our bodies have thin nitro finish that is available in a great variety of colors. A thin coat of paint leaves more room for the guitar to resonate.

Aging hardware

We match the aging of the hardware with that of the body. Very realistic look and feel in all details.

Electronics

We use CTS pots, vintage wire and a treble bleed on all our guitars. A Gillmore push-pull pot adds the neck pickup to any combination of pickups. Humbucker guitars will have a split coil push-pull switch.

’56 T and ’63 TSpecs
Body2 piece alder or paulownia
FinishNitro cellulose lacquer
NeckMaple
Neck profileRounded C
Neck thickness1st fret 0,87″ and 12th fret 0,95″
FingerboardRosewood on ’63 and Maple on ’56
Fingerboard radius9,5″ with 6105 (modern, narrow and tall)  fretwire
HeadstockKauffmann decal
NutTusq (width 41,5 mm)
TunersVintage Gotoh
BridgeGotoh intune (spacing 10,8 mm)
PickupsKauffmann overwound T set
Pickup selector3 way switch
ControlsVolume Tone
AgingLight or medium
Strings0.10 – 0.46
Travels inDeluxe gigbag
OptionsSpecsPrice
Base priceCheck with our dealers
BodySwamp Ash light weight (weight relieved)
BodyThinline Alder
Body Thinline Mahogany
BodySingle or Double Bound
NeckQuarter Sawn Roasted Maple
FinishSparkle or Paisley Finish
PickupsHumbucker in the neck with push pull coil split
PickupsLollar or Cream-T pickups
AgingHeavy
Case UpgradeVintage Deluxe Case